How to Install Sod
- 0 Comments
- 05 August 2022
How to Install Sod
Do you want a lawn but don’t know how to install sod? Who doesn’t want a lush, carpet-like lawn in their yard? Feeling the blades of grass underneath your feet is a feeling that will bring you back to childhood. So, who says you can’t experience that feeling again? Here’s how to install sod yourself for those DIY homeowners out there!
Do Some Research
It is essential to know how much sunlight your yard receives. More than likely, it will be a full sun area, but if it is a shaded area, you will want to select the appropriate sod. Once you know the amount of sunlight, you can begin to measure for the sod. Centipede and Bermuda sod do well in Fayetteville, NC, and love full, hot sun. St. Augustine Sod is an excellent option for a shady spot.
Measure out the area you will be sodding and calculate the amount of sod you will need. Sod generally comes on a pallet and can contain 450 square feet of rolls or pieces. Always round up when making your calculations. You will need some wiggle room. Be sure to call your local sod farm to get more information on how much sod comes on a pallet and if it can be delivered.
Till and Add Compost
The next step is the most crucial. It is essential to till up the land to prepare for the sod. When preparing the ground, you will want to add in (at a minimum) topsoil. It is always wise to mix compost with your topsoil, especially if you have sandy soil! Adding compost to your soil will give the sod the best chance to thrive and create a carpet-like lawn.
Level Land and Spray Down Soil
Once topsoil and compost have been added to the soil, level out the land with a rake, and try to eliminate any uneven surfaces and clumps. Remove any twigs or rocks. Spray down the soil to add some moisture. Doing so will help the soil retain moisture.
Lay the Sod
Now it is time to shine! Begin with straight edges, such as beds and walkways. Next, unroll or lay the sod, staggering the seams. In other words, you do not want to have four corners touching. Finally, make sure the seams are tight! You want the sod rolls to appear seamless.
Tamp or Roll, then Water
For this step, you may have to rent a sod roller, or you may buy a tamper. Both tools will provide the same effect. The goal is to remove air bubbles and space between the soil and sod. This will promote root growth immediately. Be sure to finish off your job with a good soak! Depending on the time of year, you may have to water nightly or every other day.
For more updates, check out our Facebook page!